Concrete Pipe Making Machine maintenance.

2024-08-26

1, The production process of the pipe making machine should pay attention to clean, wash the work before each work, so that each running part can not have cement mud adsorbed around, and affect the normal operation of the machine.


2, Adjust the distance between the upper and lower belts, ensure the normal transmission of power by the main motor, that is, to achieve the speed of the suspension roll molding, so that the density of the cement pipe meets the standard requirements.


3. The rotating parts should be lubricated frequently to make them operate flexibly.


4, The distance of the feeding machine roller is adjusted at any time to ensure the tightening of the conveyor belt and ensure the amount of material required for cement pipe forming.


5, Correct use, regular maintenance, in order to ensure the normal use of the suspension roll unit.


6, Due to the different settlement of the foundation, the user is required to adjust the six bolts of the roller and the large pulley connection and an adjustment bolt after the transmission during the use of the concrete pipe making machine to ensure the coaxial degree of the roller and the drive shaft.


7. After a period of use, the contact parts between the two ends of the roller and the tube die stop ring will inevitably appear local wear, and then the wear parts must be repaired with 507 welding rod to the required size before they can be used again.


8, Electric roller and car travel reducer, must add mechanical oil before use for lubrication, cooling.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy